The following actions have to be carried out with the remote control.
Press the SETUP button (9).
Press the arrow buttons (left and right) (8) to select a menu. The submenu is displayed
directly.
Press the arrow buttons (up and down) (8) to scroll through the submenu.
Press the ENTER button (7) to select a setting, or the left arrow button to cancel the
selection.
Press the SETUP (9) button to store the settings and exit.
SYSTEM SETUP
The options TV SYSTEM and TV TYPE are only applicable if the APD 909 is connected to
an external screen
TV SYSTEM
Select the video output format to match the appliance to the TV system: PAL, AUTO or
NTSC.
Please note: if the wrong option has been selected, this may result in very poor image
quality. In that case, select a different setting.
POWER RESUME
When restarting the player, select ON for the DVD to resume from the last place it was
stopped.
TV TYPE
In the TV TYPE section, press the arrow buttons (8) to select 4:3 4:3 PANSCAN or 4:3
LETTERBOX for a conventional TV set. Select 16:9 for a wide screen TV set.
PASSWORD
Change the default password. Enter the current password in the first box. Enter the new
password in the second box. Enter the new password again in the third box to confirm.
The default password (0000) is always active. Even if the password has been reset.
To Next Page
Loading...
Need help?
General
