Akai APRC-106

USE RADIO
Radio reception
1.Press FUNCTION button select RADIO mode.
2.Tune to required station by pressing BACK, NEXT or PLAY/PAUSE/TIME.
Manual Tuning: Press and hold the BACK or NEXT button.
Auto Tuning: Press and hold the PLAY/PAUSE/TIME button to start automatic channel Scan mode.
Preset Channel:(FM 30 preset memories)
(1) Press BACK or NEXT select desired station.
(2) Press MEMORY button once, the memory number indicator will be displayed.
(3) Press BACK or NEXT buttons to select the desired number.
(4) Press MEMORY button to save the station.
(5) Repeat steps (1) to (4) to saved other stations in the memory.
3.After the end of a program. Press the PLAY / PAUSE / TIME button on the unit,
press number keys to select the frequency you want to play.
4.Press [VOL-]or [VOL +] to adjust the volume.
5.Extend TELESCOPIC ANTENNA to its full length if you are listening to FM broadcast.
6.Turn off the radio by pressing the FUNCTION button to select another mode or press the power button
to turn off the unit.
7.The frequency will be stored in memory once the unit has been switched on again.
USE USB/SD
To listen to your USB/SD with MP3 music files.
-Press the FUNCTION button to select to USB/SD mode.
-Insert one USB/SD card, the unit will read the USB/SD and will begin playback automatically.
-Press PLAY/PAUSE button to play or pause playback;
-Press STOP button to stop playback;
-Press [VOL-]or [VOL +] to adjust the volume.
-Press BACK or NEXT to select tracks of the USB/SD;
-Press and hold on BACK or NEXT button to rewind of fast forward within a track;
NOTE: Press and hold the BACK button to return to the beginning of the current track.
Press the BACK or NEXT buttons to select the track.
Press PLAY button to start playback.
USE AUX
This model includes an Aux in jack which enables connection to any external audio device such as MP3,
Discman or Walkman.
1. Connect your external audio device to the AUX in of the micro system.
2. Select the function to AUX. Play the music from your audio device to hear it through the speakers.
Adjust the volume level to your desire.
Note: The Micro system buttons cannot control the external device. All functions must be operated from the
external audio device.
EN-4