EN-40
iPod OPERATION
To charge the battery:
When iPod is connected to this unit, the battery wil start charging.
Fig.1: this icon will show when the battery is charging.
Fig 2: this icon will show when the battery is full charged.
Charging
Charged
1 2
TO USE THE DOCK WITH YOUR IPOD:
1. Remove the iPod cover from the unit.
2. Install the iPod Dock Adapter into Dock, then put your iPod in the Dock on the unit. (Dock
adapter is a iPod accessories available separately and fits with your iPod product) .
Note:
1)After
placing
the
iPod
in
the
Dock,
all
iPod
functions
can
be
operated
by
remote
controller,
please
don't
try
to
use
the
iPod
controls
because
the
iPod
connector
may
be
damaged
while
the
dock
is
connected
with
your
iPod.
2)This
player
can
support
following
model
number
iPod
A.iPod mini(4G&6G)
B.iPod photo(40G&60G)
C.iPod nano(2G&4G)
D.5G iPod and U2 iPod with video(30G)
E.5G iPod with video
F
.iPod nano(2G&4G&8G)
G.iPod nano(4G&8G)
H.iPod Touch
3. Playing music Throught the unit speakers:
Using the iPod Dock, you can play music from iPod
through the unit speakers and operated with
remote controller
1)Place iPod in the Dock.
2)Use the remote controller to play iPod with following steps.
Enter main menu
The top and bottom choose
To choose an item
Play or pause a song.
Change the volume
Skip to the next song.
Start a song over or play the
previous song.
To go back to the previous menu
Press the MENU button on remote control.
Press the PRE-/P
RE+ button on remote control or main unit.
Press the ENTER button on remote control
Press the play/pause (
) button on remote control or main unit.
Press the "VOL+" or "VOL- " button on remote control or main unit.
Press the next/fast-forward ( ) button on remote control or main unit.
Press the previous/rewind ( ) button once to start a song over,
press it twice to play the previous song. on remote control or main unit.
Press the
MENU button on remote control.
Dock adapter
Connector well
You can remove the Dock adapter
with your fingernail by using this slot
MENU