Akai ARW100

8
● Set the volume:
- Press the UP button (2) or the DOWN button (3) to set the desired
volume (0, 1, 2 .. 20).
- Press the SET button (12) to conrm. The light brightness indicator (19)
ashes on the display.
● Set the light brightness:
- Press the UP button (2) or the DOWN button (3) to set the desired light
brightness (0, 1, 2 .. 18).
- Press the MODE button (1) to conrm.
Setting the sleep time
● Press the MODE button (1) once again. The sleep time (120 min) ashes
on the display.
● Press the set button repeatedly until the desired setting is found (120, 90,
60, 30, 15, 0 min).
Setting the current time
● Press the MODE button (1) once again. The time, date, month and year
indicators ash on the display.
● Press the SET button (12). The hour digits start ashing.
● Press the UP button (2) or the DOWN button (3) to set the desired hour.
● Press the SET button (12) to conrm. The minute digits start ashing.
● Press the UP button (2) or the DOWN button (3) to set the desired minutes.
● Press the SET button (12) to conrm. The year indicator ashes on the display.
● Press the UP button (2) or the DOWN button (3) to set the desired year.
● Press the SET button (12) to conrm. The month indicator ashes on the display.
● Press the UP button (2) or the DOWN button (3) to set the desired month.
● Press the SET button (12) to conrm. The date indicator ashes on the display.
● Press the UP button (2) or the DOWN button (3) to set the desired date.
● Press the MODE button (1) to conrm.
i
During a power failure, or when unplugging the appliance, the time
settings are lost, unless backup batteries are installed.
9