Setting the SLEEP function5.2
● Select the desired radio station.
● Set the sleep time as described above. The SLEEP indicator (17) is ON.
The appliance stops playing after the chosen time has elapsed. The appliance
will gradually build down the music volume and/or the light brightness 3 minutes
before the stop time.
● To cancel the SLEEP function, set the sleep time to 0 min.
Alarm function5.3
The appliance gradually builds up the light brightness during the last
10 minutes before the alarm time. The appliance gradually builds up the
wake-up volume during the rst 1.5 minutes after the alarm time.
● To activate the alarm, set the ALARM switch (10) to the ON position. The alarm
indicator (15) is ON.
● To cancel the alarm, set the ALARM switch (10) to the OFF position.
Snooze alarm
● To snooze the alarm, set the ALARM switch (10) to the SNOOZE position.
The SNOOZE indicator (18) ashes. The alarm sounds again after the
snooze time has elapsed.
● To stop the alarm, set the ALARM switch (10) to the OFF position.
Radio functions5.4
i
To improve the reception of the FM frequency, extend the aerial antenna.
Programming radio stations
Per radio band (FM), 30 radio stations can be preset.
● Select a radio program number.
● Press the SET button (12). The frequency setting starts ashing.
● To search for a speciic Channel, press the UP button (2) or the DOWN
button (3) repeatedly until the desired Channel is set.
● Press the SET button (12) to conrm.
10
ARW100
To Next Page
Loading...