8
Operation5.
● To switch on the radio, press the MODE button (1). The RADIO indicator (14)
on the display lights up. Press the UP button (2) or the DOWN button (3) to
set the desired station. To switch off the radio, press the MODE button (1) again.
● To switch on the nature sound, press the NATURE button (7). The NATURE
indicator (16) on the display lights up. Press the UP button (2) or the
DOWN button (3) to set the desired sound (1, 2 .. 7). To switch off the
nature sound, press the NATURE button (7) again.
● To adjust the volume, press the VOL + button (9) or the VOL - button (8).
● To switch on the lamp, press the LAMP button (4). To adjust the brightness
level, turn the BRIGHTNESS dial (11) until the desired level is set. To
switch off the lamp, press the LAMP button (4) again.
● To switch the clock setting between 12H mode and 24H mode, press the
UP button (2).
● To switch off the display light, press and hold the LAMP button (4) for a few
seconds. To switch the display light back on, repeat the operation once again.
Clock functions5.1
With the clock function, the following parameters can be set: alarm time (incl.
alarm mode, snooze time, volume, light brightness) sleep time, current time.
Setting the alarm time
● Press and hold the MODE button (1). The alarm icon (15) ashes on the
display.
● Set the alarm time:
- Press the SET button (12). The hour digits start ashing.
- Press the UP button (2) or the DOWN button (3) to set the desired hour.
- Press the SET button (12) to conrm. The minute digits start ashing.
- Press the UP button (2) or the DOWN button (3) to set the desired minutes.
- Press the SET button (12) to conrm. The alarm mode starts ashing.
● Choose the alarm mode (radio or tone or nature).
● Press the SET button (12). The snooze icon (18) ashes on the display.
● Set the snooze time:
- Press the UP button (2) or the DOWN button (3) to set the snooze time
(5, 6 .. 10 min).
- Press the SET button (12) to conrm. The volume indicator (13) ashes
on the display.
8
ARW100
To Next Page
Loading...