Akai AT-S55/L

V. VOLTAGE CONVERSION
32
tn
0
LF)
Ls
[Fi] ri fl
(_—_
=
ee
240V AREA: 2A 250V
220V AREA: 2A 250V
FUSE (FI)
110V AREA : 4A 250V
REAR SIDE
Fig. 7 Voltage Conversion (U/T Model Only)
Models for Canada, U.S.A., Europe, UK, Australia
(AM-US55) and Japan (AM-U55J) are not equipped with
this facility.
Each machine is preset at the factory according to desti-
nation but some machines can be set to 110V, 220V or
240V as required.
If voltage change is necessary, this can be accomplished
as follows.
1) Disconnect AC Power Cord.
2) Loosen holding screws and remove upper cover.
3) Remove existing Line Voltage Fuse and insert the
required Line Voltage Fuse into the proper fuse
holder.