Your TV is packaged with the Stand and the Cabinet separated. Before enjoying this TV,
please carry out the Stand Installation according to the instructions below.
Step 1
Place the TV faced down on a soft cloth or
cushion to prevent the panel from being
damaged.
Step 2
Align the screw holes on stand and TV bottom
and then push the stand until the TV is fully
seated on the stand.
NOTE: Make sure the orientation of trapezoid
head on stand is corresponding to the trapezoid
slot on TV bottom.
Step 3
Tighten the included screws with a screw driver.
NOTES:
- Unplug the power plug first when installing or
removing the TV Stand.
- This product is a 24” Series TV. Contact one or
more partner for assistance when installing or
removing the TV stand.
STAND INSTALLATION
Press
6
To Next Page
Loading...
