To Next PageTo Next Page
Need help?Do you have a question about the Akai LCT-4216 and is the answer not in the manual?
Guidelines for safe servicing procedures, including wiring, insulation, and component handling.
Essential instructions for safe operation and servicing of the apparatus.
Defines the environmental and setup conditions for performing product tests.
Details the functions and operations of the remote control unit.
Describes the main module components, including panel and PCB assemblies.
Details the various PCBs involved in signal processing.
Describes the function and input/output characteristics of the power supply.
Explains the functions of the main board for video signal processing.
Lists common failure symptoms related to the main video board.
Overview of the PW181 ImageProcessor's capabilities and features.
Key features of the PW181 ImageProcessor, including scaling and processing.
Highlights the key features of the AD9883A analog interface.
Lists the primary applications for the AD9883A.
Overview of the PW1231A digital video signal processor.
Key features of the PW1231A, including deinterlacing and scaling.
Key features of the μPD64083 LSI for Y/C separation.
Introduction to the VPC 323xD video processor and its capabilities.
Overview of the SiI 161B receiver for high-resolution displays.
Key features of the SiI 161B receiver, including low power and DVI compliance.
Highlights key features of the Z86229 NTSC Line 21 CCD Decoder.
Introduction to the MSP 34x0G family of sound processors.
Records of changes made to the specification document.
Detailed electrical characteristics of the product.
Details the protection mechanisms implemented in the power supply.
Specifies the environmental conditions for operation and storage.
Information on safety standards and electromagnetic compatibility.
Details on product reliability metrics like MTBF.
Specifies mechanical dimensions and connection details.
Overview of the LC420W02 Color Active Matrix LCD.
Key features of the LC420W02 LCD module.
Lists the maximum allowable values for various parameters.
Details the electrical characteristics of the LCD circuit and inverter.
Describes the pin configuration for the LCD module connector.
Details the pin configuration for the backlight inverter connector.
Lists the optical characteristics of the LCD panel.
Details the mechanical dimensions and properties of the LCD module.
Specifies the conditions for environmental reliability testing.
Guidelines for safely mounting the TFT LCD module.
Guidelines for safely operating the TFT LCD module.
Handling instructions for system assemblers.
Instruction to follow the correct power sequence to avoid damage.
Guidance on preventing mechanical stress on the LCD module.
Instructions for maintaining the cleanliness of the LCD surface.
Caution against scratching the polarizer surface.
List of electrical spare parts for the LCD.
List of mechanical spare parts for the LCD.
Step-by-step process for upgrading the software via RS-232C.
General
