Akai LCT-4216

LG.Philips LCD Confidential
Guidance of handling Color TFT LCD Module
Guidance of handling Color TFT LCD Module
System Assembler
1
Follow power sequence.
•Abnormal power sequence may cause
critical malfunction or electrical
damage.
•Please follow power sequences
described in the specification sheet.
2
Prevent mechanical stress.
•Please fix the LCD by screw at the
four mounting holes on the corners.
•Please make LCD free from physical
stress such as bending, twisting,
banging or pressing.
3 4
Keep LCD dust-free.
•LCD Module is sensitive against dust.
Dust can cause functional and/or
visual defect.
•So, please keep LCD dust-free.
Prevent overheat.
•High temperature on the surface of
the screen may cause poor quality.
•Please make LCD used on specified
temperature. Heat from backlight
should be considered.
5
Need EMI solution.
•LCD Module is produced to be EMI
solved. However, system is needed to
be matched for EMI solution.
EMI : Electro-Magnetic Interference
6
If possible, avoid low temp.
operating.
•Low temperature under 10℃ make
LCD respond slowly, make backlight
worse operated and shorten very
much the lifetime accordingly.
•LCD is strongly recommended to be
used at room temperature.