Akai LCT-4216

If you forget your V-Chip Password
- Omnipotence V-Chip Password: 1234.
- Press MENU button.
- Press Up, Down and CH+, CH-buttons to highlight "V-Chip" Control.
- Press OK button to pop up "INPUT PASSWORD".
- Use the Number buttons (0~9) to enter the omnipotence Password 1234.
- Press Down to highlight "Password change" Control.
- Press OK button to confirm and will pop up "Password Change" item.
- Change to your familiar Password again.
Software upgrade
- Connect the RS-232C input jack to an external control device (such as a computer) and software upgrade.
Type of connector; D-Sub 9-pin male
1
No. Pin name
5
1 No connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
9
6 DSR (DCE side ready)
7 RTS (Ready to send)
6
8 CTS (Clear to send)
9 No Connection
RS-232C configurations
7-wire configuration
3-wire configuration
(Standard RS-232C cable)
(Not standard)
PC PDP PC PDP
2
3
5
4
6
7
8
3
2
5
6
4
8
7
TXD
TXD
RXD
TXD
RXD
2
3
5
4
6
7
8
3
2
5
4
6
7
8
RXD
GND
RXD
TXD
GND
DTR
GND
GND
DTR
DSR
DSR
DTR
DSR
RTS
DTR
DSR
RTS
CTS
CTS
RTS
CTS
RTS
CTS
D-Sub 9
D-Sub 9
D-Sub 9
D-Sub 9