CONTINUATION PAGE
Technical Specifications
LCT-4216
NUMBER
2 OF 9 PAGES
1. Standard Test Conditions
All tests shall be performed under the following conditions, unless otherwise specified.
1.1 Ambient light
: 150ux (When measuring I
B
, the ambient luminance
≦0.1Cd/m
2
)
1.2 Viewing distance
: 50cm in front of LCD
1.3 Warm up time
: 30 minutes
1.4 PDP Panel facing
: no restricted
1.5 Measuring Equipment
: PC, Chroma 2225 signal generator (with Chroma digital
additional card) or equivalent, Minolta CA100 photometer
1.6 Magnetic field
: no restricted
1.7 Control settings
: Brightness, Contrast, Tint, Color set at Center(50)
1.8 Power input
: 100~240Vac
1.9 Ambient temperature : 20°C ± 5°C (68°F ± 9°F)
1.10 Display mode
: 31.5KHz/60Hz (Resolution 1366 x 768)
1.11 Other conditions
:
1.11.1 With image sticking protection of LCD module, the luminance will descend
by time on a same still screen and rapidly go down in 5 minutes. When
measuring the color tracking and luminance of a same still screen, be sure t
o accomplish the measurement in one minute to ensure its accuracy.
1.11.2 Due to the structure of LCD, the extra-high-bright same screen should not
hold over 5 minutes for fear of branding on the panel.
To Next Page
Loading...
