2.7 SPDIF
This item is used to select desired SPDIF audio output type.
Available options: Off, PCM, Auto.
3. CHANNEL
3.1 Channel Management
- Press UP/DOWN navigation button to select this item and press OK or RIGHT navigation
button to enter submenu.
- Press UP/DOWN navigation to select preferred program.
a) Press RED button on remote control and use number buttons to input the password. Then
press RED button to add/remove a delete mark on highlighted program. After that, press OK
button to enter a dialogue box. Select OK to delete it; select Cancel to cancel this operation.
b) Press GREEN button on remote control and use number buttons to input the password.
Then press GREEN button to lock/unlock a program.
c) Press YELLOW button on remote control to add/remove skip mark.
d) Press BLUE button on remote control to enter MOVE mode. Then use UP/DOWN
navigation button to select preferred position and press OK button to move it.
32
To Next Page
Loading...
