5
Initial
INSTALLATION
Setting up the video cassette recorder
◆
Switch the TV on.
◆
You can also start "Auto Search" in the menu
"PR Preset" "Auto Search".
◆
To tune in new stations (manual tuning) and to
enter station names see page 16-18.
You should see this picture the first
time you switch on the TV and video.
Choose your language.
"AUTO SEARCH" tunes in all the stations you can
receive in your country and ...
... sorts them in an order common for your country.
AUTO SEARCH!
OK:CONFIRM MENU:END
AUTO SEARCH
MENU:END
PR03
V-L - - - - - - - - - - - - - -
76%
PLEASE WAIT...
AUTO SEARCH
CLOCK SET
0-9:SETUP (HOUR)
/ :CORRECT MENU:END
TIME - - : - -
DATE - - / - - /- - - -
Then type in the current time and date.
MANUAL SET
PR01 P-01 PR08 P-08
PR02 P-02 PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 P-05 PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
OK:CONFIRM MENU:END
Should you wish the stations to have the same numbers
as those used on the TV, follow the instructions in
"Sorting programme locations" on page 18.
Else ...
exit the basic installation function and enjoy
your video recorder.
◆ If you don´t see this picture, because you don´t use a RCA cable, search this picture now
(CH 26) with the station tuning functions of your TV set (see its user manual).
◆ In case of interference problems on CH 26, type in an other
transmission channel between 21 and 69 using the number buttons.
OK for "Auto Search!".
LANGUAGE SET
ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
NEDERLANDS
SVENSKA
SUOMI
PR+/-:SELECT
OK:CONFIRM MENU:END
To Next Page
Loading...