GENERAL OPERATIONS
06
OPERATII GENERALE
07
EQ OFF/ON
Select “EQ ON ” POP CLASS ROCK EQ OFF menu male.
GENERAL OPERATIONS
SOUND ADJUSTMENT
Turn on (2) can adjust the desired volume quality.
Press SEL button (2) will change in the following order.
Option:
VOLUME
Adjust volume level by using (2) knob. Turn the VOL knob to left to decrease
the sound level, turn the VOL knob to right to increase the sound level.
VOL/ SEL
Note: The unit is initially set to volume mode.
VOL
BAS TRE BAL FAD
(Volume) (Bass) (Treble) (Balance)
(Fader)
Press VOL/SEL button shortly and turn VOL button to right or left to select different
mode.
menu
BASS
Press VOL/ SEL button(2) one time. Adjust bass level by using VOL/ SEL(2) Knob.
TREBLE
Press VOL/ SEL button(2) two times. Adjust treble level by using VOL/ SEL(2) Knob .
BALANCE
Press VOL/ SEL button(2) three times. Adjust sound balance between left and right
speakers by using VOL/ SEL(2)Knob .
FADER (optional)
Press SEL button(2) four times. Adjust sound balance between front and rear speakers
by using VOL/SEL(2)Knob.
SELECT MENU
Press VOL/SEL button for several seconds, selecting menu is activated as cyclical mode
of following function for use's selection:
BAS
VOL
TRE BAL
EQ
LOUD OFF/ON
STEREO/MONO DX/LOC
FAD
POWER /MOD conversion
2.Under power off status,short press is power on,
Under power on status,short press is switching mode,long press is power off.
LOUD
EQ
LOCAL/DX
Pozitia ”LOCAL” se foloseste in zonele cu semnal puternic pentru a permite radioului se se
opreasca din cautarea manuala numai la semnalele puternice .
Alegeti pozitia DX in zonele cu semnal slab pentru a receptiona toate posturile.
AREA SETUP (programarea ariei)
In modul radio ,apasati cateva secunde butonul SEL .Afisajul LCD va arata de la BEEP
ON- AREA USA/EUR. Se poate folosi VOL +/- pentru a selecta freventa ARIEI.
Nota : Pe Telecomanda
Apasati scurt butonul ”DSP” pentru oprire temporara sunet(muting) .Apasati acelasi buton
din nou pentru a reporni sunetul.
Apasand lung ”DSP” pe afisaj apare ceasul ”00:00”.Apasati scurt ”DSP” si orele vor palpaii.
Rotiti ”VOL/SEL” pentru reglajul orei. Apasati butonul ”SEL” si minutele vor palpaii.
Rotiti butonul ”VOL+/-” pentru a regla minutele. Daca nu se executa nici-o operatie
in 5 secunde ,aparatul va memora timpul curent si revine la modul curent.
RESET
Butonul RESET(5) este pe carcasa si poate fi activat cu un pix sau alt obiect metalic.
Acesta se poate activa in urmatoarele situatii:
-Instalarea initiala a aparatului dupa ce toate firele au fost conectate.
-Nu functioneaza nici un buton de functii.
-Apare simbolul de eroare pe afisaj.
To Next Page
Loading...
