INSTABLAT]ON
Connecting VHF and UHF Antennas
If y()i antenna has a set of" leads that
look like this, see "Anterlnas with
300-ohm Flat T,_'in Leads," below.
If yo_lr anterlna has one lead that looks
like this, see "Antennas with 75-ohm
RoHnd Leads," on [)age 2.2.
If yoH have two antennas, see "Separate
VHF and UHF Antennas," on [)age 2.2.
Antennas with SOO-ohm Fiat Twin Leads
If'}/oH are Hsing an ofl'-ah' antenna (s_lnh as aioof' arlterlna oi 'rabbit eais") that has
00-_ hm t_._in flat leads, f'ollo\_ the diientions below.
1
Place the wires trom the
[w_n leaas unoer rne
scre as onthe 300-75
onto auap_c tool sue
Due@. use a sc[ewuHve_
ro tighten the screws
2
Plugme adaptor role
me VHF/UHFtermma
on me oor[om oTrile
DaCK 08neL
Antennas w[th 75°ohm Round Leads
Plugthe antenna lead
into the VHF/UH[
terminal on the bottorn
ofthe back panel.
71!i
_, 1 (:}/b_,Plf 17 _l-\'t(): [NST_J] ,<Vf](}bl
To Next Page
Loading...
