INSTALLATION
Separate VH[ and UHF Antennas
If you have t\_o separate antennas fbx youITV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV: This
piocechne requires a an optional combiner-adaptor (available at most elect[orlh's shops).
1
Connect both antenna
leads to the combiner.
Plug the combiner into
the VHF/UH[ terminal
on the bottom of the
Connecting Cable TV
To connect to a cable TV system, follow the instHlctions below
Cabme without a Cab|e Box
Plug the incoming cane
into the VHE/UHF
antenna terminal on back
Because this TV is cable ready,
you do not need a cable box to view
Imscramb[ed cable channels.
Connecting to a Cab|e Box that Oescrambies A|_ Channe|s
This telmina] might be labeled
"ANT OUT," VHF OUTF or simply,
Iqnd the cable that is "()UT.'
connected to the
ANTENNA OUTterminal
Connectthe other end
ofthis cable to the
VH[/UHF antenna
temfinal on the back ot
C]]/q>FI:R T\\(): [NS'[AII ,\']/()N _ , 2
To Next Page
Loading...
