INSTALLATION
Connecting to a Cable Box that Descramb|es Some Channe]s
If'yet cable box descrambles only some channels (stlch as ptemitlm channels), ['o]]ow the
instltlctiorls below. Yotl will need a two-way splitter, an RF (A/B) switch, and f'oui lengths of"
coaxial cable. (These items ale available at rnost electionics stoies.)
Find and discennectthe
_1I This terminal might be labeled
ANT IN," VHF II',!, or simply,
'IN."
cable box,
Connect this cable to a
Incoming
Cable
Splitter
3
Connect a Coaxialcable
between an OUTPUT
termina! on the splitter
and the IN terminal on
Incoming
Cable _
Splitter
Cable Box
Connect a coaxial cable _
between the ANTENNA
OUT tertnina! on the Incoming
cable box and the B- IN Cable
Splitter FIF (A/B)
terminal on the A!B CableBox Switch
switch.
co'._[in[_ecl...
_, 3 (];//A,/q/]_ _[-k't( ): [blST%J ]A'[l(}bl
To Next Page
Loading...
