Why is there no sound coming from my Akai DV-P4330S?
If there is no sound, ensure the audio output wire is correctly connected and not loose. Also, verify that your TV is in AV mode and the amplifier is in normal working condition. Reconnect the audio wire and check the TV and amplifier settings.
What to do if Akai DV-P4330S remote control does not work?
If the remote control isn't working, the battery may not have enough power, or the remote controller isn't pointed correctly at the remote sensor, or the remote sensor is dirty. Try changing the battery, point the remote controller directly at the remote sensor, and clean the surface of the remote sensor.
What to do if Akai DVD Player pictures stop moving or skipping?
If the pictures sometimes stop moving, skip, or the sound is abnormal during playback, the disc might be cracked or dirty, or the player is experiencing shock. Clean or replace the disc and move the speaker away from the player.
How to fix Akai DV-P4330S picture without color?
If the picture lacks color, the picture mode of the TV may not match the player's setting. Change the picture mode system setting.
What to do if Akai DVD Player does not work?
If the player does not work, it might be interfaced by another electrical appliance, or the quality is not in good condition. Turn off the power and turn it on again, then try to operate the player. If it still does not work, please contact the service centre.
General| Type | DVD player |
|---|---|
| Remote Control | Yes |
| Progressive Scan | Yes |
| Power Supply | AC 220-240V, 50/60Hz |
| Audio Formats Supported | Dolby Digital |
| Video Formats Supported | MPEG-2, Xvid |
| Connectivity | HDMI, Composite Video Output, Component Video Output, Coaxial Digital Audio Output |
| Region Code | 2 |
| Playable Media | DVD, CD |
To Next Page
