Akai HX-A2 - Page 7

I. SPECIFICATIONS
TRACK SYSTEM
3 4 Track 2 Channel Stereo System
TAPE Philips Type Cassette
MOTOR Electronically speed controlled DC Motor for capstan drive x 1
HEADS High Density head for recording/playback x 1
Erase head x |
TAPE WINDING TIME
100 sec. Using a C-60 cassette tape
WOW & FLUTTER
0.05% WRMS, 0.12% WTD (DIN)
DISTORTION 0.7% (Metal)
FREQUENCY RESPONSE Metal 30Hz to 17,000Hz + 3dB
CrO, 30Hz to 16,000Hz + 3dB
Normal 30Hz to 15,000Hz + 3dB
S/N
56dB (Metal Tape)
Dolby B ON: Improves up to 5dB at 1kHz, 10dB above SkHz
Dolby C ON: Improves up to 15dB at 500Hz, 20dB at 1kHz to 10kHz
INPUT SENSITIVITY/IMPEDANCE LINE 70 mV/47 kohms
DIN 5 mV/10 kohms (HX-A2-G type)
MIC 0.25 mV/5 kohms
OUTPUT SENSITIVITY/IMPEDANCE LINE 380 mV/1 kohms
DIN 380 mV/1 kohms (HX-A2-G type)
POWER REQUIREMENTS
DIMENSIONS
WEIGHT
PHONES 0.3 mW (at 8 ohms)/56 ohms
120V, 60Hz for USA and Canada
220V, 50Hz for Europe except UK
240V, 50Hz for UK and Australia
110V/120V/220V/240V, 50/60Hz switchable for other countries
440(W) x 115(H) x 258(D) mm
(17.3 x 4.5 x 10.2 inches)
3.3kg (7.3 Ibs)
* For improvement purposes, specifications and design are subject to change without notice.
* Noise Reduction manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby” and the double-D symbol are
trade marks of Dolby Laboratories Licensing Corporation.
en
SERVICE
MANUAL
HX-A2
4