LG.Philips LCD Confidential
Guidance of handling Color TFT LCD Module
Guidance of handling Color TFT LCD Module
System Assembler
13 14
Do not stack LCDs.
•LCD consists of fragile components
such as TCPs or Glasses.
•Stacking LCD can cause undesired
defects.
Defect panel also handled
with care
•To prevent another defect, please
handle the defective LCD as a good
one.
•Defective LCD should be repaired.
15 16
Let the B/L wire backside
of LCD.
•If let the backlight wire front side of
LCD, the backlight connector can hurt
the surface of polarizer.
Do not provide strong
pressure at connecting
•Strong pressure can transfer the
force to TCP which is the weakest
parts of LCD. Eventually can make
TCP crack or other unexpected defect.
17 18
Never connect/disconnect
at power on.
•LCD consists of CMOS which is known
as weak component against EOS.
Please do not connect or remove at
power on.
•Semi-assembled product should be
handled with wrist strap.
•Earth human body when handle the
LCD. Please do not touch the
interface connector pin with human
body or charged device.
Electro-static discharge can
make damage.
To Next Page
Loading...
