Akai LCT3226 - 4 Names and Functions of Parts; Front View

10
4. Names and Functions of Parts
4.1 Front View
The functions of the buttons are described as follows:
STANDBY: Press (Standby) to turn on and turn off.
A. They are used as ◄ / ► buttons in the OSD Menu screen.
B. Press to adjust the volume.
A. They are used as ▲ / ▼ buttons in the OSD Menu screen.
B. Press to scan through channels. To scan quickly through channels, press and hold
down either channels.
MENU: Press to display the menu. Press again to exit the menu.
SOURCE: Press to cycle display TV, AV, S-Video, Component 1, Component 2, DVI and VGA
source menu. When display the OSD-menu, press it to confirm.
CH.
VOL.
Sketch map
󱯎
󱯐
POWER
󱯎 Push the power switch (O: Off, I: On).
󱯐
(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on / Standby) LED: Press
(Power) to turn on and off.
Indicator on (Red) Standby mode
Indicator on (Green) Power on mode
SOURCE MENU
STANDBY
CH.
VOL.
IR
NAMES AND FUNCTIONS OF PARTS----FRONT VIEW----REAR VIEW