Akai MPC Service Manual

3. DISASSEMBLE THE HEADPHONE PCB ASS’Y.
(A)REMOVE 2 SCREWS FROM THE HEADPHONE PCB ASS’Y.
(Fig3)
4. DISASSEMBLE THE TOP PCB ASS’Y.
(A) REMOVE 19 PCS KNOBS AND 1 PC JOG WHEEL FROM THE SUBCHASSIS.
(B) REMOVE 8 SCREWS FROM THE PAD HOLDER.
(C) REMOVE PAD HOLDER FROM THE TOP PCB ASS’Y.
(D) REMOVE 15 SCREWS FROM THE TOP PCB ASS’Y.
(Fig4)

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired