Akai MPC5000 - Page 4

5. DISASSEMBLE MAIN CONTROL PCB, VOLUME PCB,Q LINK PCB,SYNTH
PCB,SELECT PCB ASS’Y.
(A) REMOVE 5 PCS SCREW FROM MAIN CONTROL PCB.
(B) REMOVE 3 PCS SCREW FROM VOLUME PCB.
(C) REMOVE 5 PCS SCREW FROM Q LINK PCB.
(D) REMOVE 3 PCS SCREW FROM SYNTH PCB.
(E) REMOVE 2 PCS SCREW FROM SELECT PCB.
(Fig5)
6. DISASSEMBLE THE PAD ASS’Y.
(A) REMOVE 6 PCS SCREW FROM THE HOLDER PAD.
(Fig6)