Akai MPC5000 - Chapter 2: Basic Operation; MAIN Page

9. DISASSEMBLE THE ANALOG PCB.
(A) REMOVE 4 PCS SCREW FROM THE REAR PANEL.
(B) REMOVE 4 PCS SCREW FROM THE REAE PANEL
(C) REMOVE 1 PCS SCREW FROM THE REAE PANEL
(D) REMOVE 1 PCS SCREW FROM THE REAE PANEL
(Fig9)
10. DISASSEMBLE THE CF PCB
(A) REMOVE 3 PCS NUTS FROM HOLDER HP.
(B) REMOVE 1 PCS M SCREW FROM CF PCB.
(Fig10)