Akai MPK Road 88 - DISASSEMBLY PROCEDURES

DISASSEMBLY PROCEDURES
1. DISASSEMBLE THE TOP COVER.
(A) REMOVE THE TOP COVER.
(Fig1)
2. DISASSEMBLE THE HP PCB ASS’Y AND WHEEL ASS’Y.
(A)REMOVE 2 PCS SCREW FROM THE PITCH AND MOD HOUSING.
(B)REMOVE 3 PCS SCREW FROM THE HP PCB HOLDER.
(C)REMOVE 4 PCS SCREW FROM THE WHEEL ASS’Y.
(D)REMOVE 4 PCS SCREW FROM THE PITCH AND MOD HOUSING HOLDER.
(Fig2)