17
USING THE MPK25 WITH ARKAOS
ArKaos GrandVJ is a visual effects program that allows you to trigger
video, still and flash clips from a MIDI source. The MPK25 supports
this software as well as ArKaos VJ MIDI. These programs and other
VJ applications are very well suited for using the MPK25.
This preset is not specific to ArKaos but is designed to allow you to quickly customize your ArKaos presets.
Keyboard – The keyboard is set to the COMMON MIDI channel and has a range from C1 – to C5. The keyboard is well suited for
momentarily triggering video clips or effects. You can use the keyboards ARPEGGIATOR and LATCH function to automatically have it
cycle through a range of clips.
Pads – The pads have been programmed to be latched or toggled on and off. This allows you to assign backgrounds, overlay clips or fx
that will run until you hit the pad a second time to turn it off. You can use the NOTE REPEAT function to retrigger your video at timed
intervals. By playing with the GATE TIME on NOTE REPEAT you can set how long the note stays on before retriggering. By setting a
short GATE TIME the clip or effect will flash on and then off quickly. With a long GATE TIME of 99, the note off and note on are very
close so it looks like the clip is looping.
Controllers – the controllers are set from 1 – 72. They are numbered left to right, top to bottom. i.e. Controller Bank A Knobs 1-8 are =
MIDI CC 1-8, the sliders are 9-16, the switches are 17-24.
The MPK25 makes a great VJ controller. Dig in and discover the possibilities.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
