Akai PD-X2210I

8
2. When the unit is subjected to a shock during play, the data stored in memory con-
tinues to be decoded and continue reading new data. As the data is read from
memory, the indicator changes to
. Once the pickup returns to its original posi-
tion, new data is stored in memory and the display changes back to the
mark.
3. If the set is subjected to repeated shocks and all the data stored in memory is used
up, the
mark is displayed and the sound will skip or stop for a brief period until
the memory base fills up again.
4. to turn off the anti-skip function, press the ASP button again.
NOTE: Keep the digital anti-skip function off when using the set in stable and no
vibration area, where it will not receive shocks. The battery power consumption is
less than when it is on.
NOTE: When the digital anti-S function is switched on or off, the sound will be inter-
rupted for 1 to 2 seconds, this is normal (the interrupted time is used for the memory
on or off).
CONNECTING TO HOME STEREO SYSTEMS
The line out jack is made to accept a stereo mini plug (3.5mm). By using a commer-
cially available audio line cable, simply connect the cable’s mini plug to line out jack
on your player, and the other appropriate end to CD/AUX input(s) of your home
stereo system.
NOTE: Always switch the power off before making any connections between the
player and any other set.
NOTE: The volume control or the
player become inoperable when the
line out jack is used. Adjustments are
made on your audio system.
TECHNICAL SPECIFICATIONS
MODEL NO. PD-X2210I
Audio
D/A conversion 1-bit DAC four times oversampling
Frequency response 20-20,000Hz
Anti-shock 10 seconds memory
Wow and flutter Below measurable limits
No. of channels 2 channels (stereo)
Output level Line output: 0.6V rms (47KΩ )
Headphone: 20mW (32Ω)
Bass Boost effect (100Hz) + 6 dB
General
Power requirements -2 x LR6 / UM-3 / “AA” alkaline battery
- DC in 4,5V jack accepts AC power adaptor
(centre positive)
Power consumption 0.8W (DC 3V)
Dimension Approx. 138 (W) x 138 (D) x 28.5 (H) mm
Weight (without batteries) 230 g.
Design and specifications subject to change without notice.
CD-R/CD-RW compatibility such as CD-R / CD-RW play capability of this unit may
vary depend on quality of media, CD burner and application software & "PRECAU-
TIONS FOR UNIT" section.
“Playback of CD-R and CD-RW may depend on recording conditions”.
LINE OUT
ASP ASPASP ASP