T e c h n i c a l S p e c if ic a t i o n s
PDP4225M
E L E C T R IC A L C H A R A C T E R IS T IC S
2. P o w e r In p u t
2.1 Voltage
2.2 Input Current
2.3 Maximum Inrush Current
Test condition
2.4 Frequency
2.5 Power Consumption
Test condition
2.6 Power Factor
2.7 Withstanding voltage
3. D is p la y
3.1 Screen Size
3.2 Aspect Ratio
3.3 Pixel Resolution
3.4 Peak Brightness
3.5 Contrast Ratio (Dark room)
3.6 Viewing Angle
3.7 OSD language
4. S ig n a l
4.1 AV & Graphic input
4.1.1 Composite signal
4.1.2 Y,C Signal
4.1.3 Component signal
4.1.4 Graphic I/P
4.1.5EDID compatibility
4.1.6 I/P frequency
100 ~120VAC 60Hz
5.0 /2.5A
<30 A (FOR AC110V ONLY)
Measured when switched off for at least 20 mins
60Hz(±3Hz)
330W Typical
full white display with maximum brightness and
contrast
Meets I EC 1000-3-2
1.5kVac or 2.2kVdc for 1 sec
42” Plasma display
16:9
852x480
1400 cd/m2 (Typical, Panel only)
3000:1 (Ratio, Typical, in a dark room, Panel only)
Over 160°
English, French, Spanish.
AV
S-Video
YPbPr, HDMI,VGA compatible
Analog: D-sub 15pin detachable cable
Digital:HDMI
DDC 1.3
fH: 31.5kHz to 60kHz/fV: 56.25Hz to 75Hz(1024x768
recommended)
4/73
To Next Page
Loading...
