Mains Supply
If the set is equipped with a 127/220V selector, set this selector to the local mains voltage.
Connect the mains lead to the wall socket. The mains Supply is switched on.
To disconnect the set from the mains completely, withdraw the mains plug from the wall socket.
Setting The Clock
1. Check the radio is switched off.
2. Press CLOCK SET for 3 seconds on the front panel to start clock setting.
3. Press PRESET + button for 12-hours/24-hours selection.
4. Press CLOCK SET on the front panel to hour setting.
5. To set the hours, press PRESET + or PRESET - while the display is still flashing.
6. Press CLOCK SET on the front panel to minute setting.
7. To set the minutes, press PRESET + or PRESET - while the display is still flashing.
8. Press CLOCK SET on the front panel to complete the clock setting.
Setting The Alarm
1. Check the radio is switched off.
2. Press AL SET for 3 seconds on the front panel to start alarm setting.
3. To set the hours, press PRESET + or PRESET - while the display is still flashing.
4. Press AL SET on the front panel to minute setting.
5. To set the minutes, press PRESET + or PRESET - while the display is still flashing.
6. Press AL SET on the front panel, and press PRESET + or PRESET - to select the alarm sound as
Buzz or Radio.
7. Press AL SET on the front panel, and press PRESET + or PRESET - to select the volume of
alarm sound.
8. Press AL SET on the front panel to complete the alarm setting.
Remark: Press AL SET to enable / disable the alarm function. To make sure the alarm icon is switch
on if alarm function is in using.
Snooze Function
1. When your alarm sounds, you can press the Snooze Button to turn off the alarm temporary for 9
minutes. The radio will then turn on again.
2. Snooze can be repeated until the ALARM Button is pressed.
Sleep Function
1. Press the SLEEP Button to select a time. For example, when the LED display shows 15 minutes.
The radio turns on and then turns off automatically after 15 minutes.
2. To select a longer playing time, press the SLEEP button to select 15 / 30 / 45 / 60 / 75 / 90
minutes.
3. To turn off the radio at any time, press the ON / STAND BY Button.
Radio
1. Press ON / STAND BY to switch on the radio.
2. Press FUNCTION once or more to select Radio.
3. The display shows the radio station details throughout the radio mode.
4. Select your station by using TUNING + or TUNING –
5. Adjust the sound with VOLUME.
6. To switch off the radio, press ON / STAND By once.
- EN 2 -
To Next Page
Loading...
