Akai PT50DL14

Channel Control
English - 50
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button.
Press the … or † button to
select “Channel”, then press
the ENTER button.
2
Press the … or † button to
select “LNA”, then press the
ENTER button.
3
Press the … or † button to
select “On” or “Off”, then
press the ENTER button.
4
Press the EXIT button to exit.
NOTES
• LNA functions only when antenna is set to Air.
The settings will be stored separately in each channel.
• If the picture is noisy with the LNA set to On, select Off.
• The LNA setting must be made separately for each channel.
Channel
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
LNA : On √
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Channel
Antenna : Air
Auto Program
Add/Delete
Favorite Channels
Name
Fine Tune
Signal Strength
LNA : On
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Channel
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
LNA : On √
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Off
On
BP68-00548A-00Eng(030~051) 9/12/05 9:38 AM Page 50