Akai PT5598HD

56
SPECIAL FEATURES
1
Press the Menu button.
Press the CH button to
select “PIP”, then press the
VOL + button
PIP : On
SOURCE : TV
Size : Large
Swap
ANT/CATV : ANT
Channel : ANT 4
PIP
Changing the PIP Channel
2
Press the CH button to
select “Channel”, then
press the VOL + or VOL -
button to change the
channel that appears in
the PIP window.
Press the Menu button to
exit.
PIP : On
SOURCE : TV
Size : Large
Swap
ANT/CATV : ANT
Channel : ANT 4
PIP
When you press the Locate button repeatedly, the PIP window
moves from corner to corner on the TV screen.
Changing the Location (Rotating) in PIP mode
This procedure scans all of the available channels and then stores
them in memory.
Press the Scan button, and the memorized channels will appear in
sequence for 2 to 3 seconds per channel.
Press the Scan button again to stop the scanning process.
When Scan stops, the viewing mode will return to its original set-
ting.
Scanning the Available Channels
▼
Quick way to access PIP CH:
Simply press the (PIP) “CH” button
on the remote control.
Note: The PIP channels are not available when RF is set to ANT-B.
(The PIP channels link to ANT-A).