Sampling
# Basic
Operations
There
are two methods
for sampling on the SOL
Auto-trigger:
The SOI automatically starts sampling
when the input
level of a sound source reaches the trigger
level
set beforehand.
Manual:
You can manually start sampling at the desired
point if the
trigger level has been
set to
"100".
Auto-triggered Sampling
Here it is explained how to sample using
auto-triggering.
1.
Connections
Connect your system and
the
SOI refering to the diagram
on page
1 1
.
2. Power
On
Turn the SOI on without any
disk
inserted —the default program
is loaded
into
the memory and the
SOI
goes
to Play mode.
Adjust the volume using the main volume control
by
monitoring
the test tones contained in bank 1
.
3. Selecting the REC GAIN
Select a suitable position of
the
REC
GAIN
switch according
to
the output
level of
the
sound source
connected the the SOI input jack. Refer
to
the list below and set
the switch to HIGH or
LOW. As
in the list, when using a microphone, HIGH should
be
selected.
SfSB
t*FfMHtl3«ii
OUTPUT
CD
Sound
Source
RED GAIN
Devices such
as
microphone
or electric
guitar that have
a
low
output level.
^
(~52dBm)
Devices
such as
TV
set, CD
player,
DAT, tuner,
cassette deck, or any other
audio machine, and
electronic musical
«
instruments
such
as
synthesizers
that
all have
a
high
output
level.
*>
LOW
^
(~12dBm)
19
To Next Page
Loading...
