Akai S01

(SETUP)
Parameters in the
SETUP
index are used for general
settings for the
SOI
.
They
are not for individual
samples in banks, so
it
is unnecessary to swich banks
when
setting
the
following parameters.
MID! TRANSPOSE
Shifts the entire
pitch of the SO
1 in
semitones
regardless
of the individual pitch and tuning
settings
of
each
bank.
Value Range:
-24~0-+24
(unit:
semitone)
*
If using the
MIDI keyboard
with
some transpose
function
that transmits the "shifted"
MIDI note
number, you
should not
use
that function and the
MIDI
TRANSPOSE on the
S01
at the
same time.
Otherwise, you
may
be
confused with unexpected
reproduction when playing the keyboard.
MASTER TUNE
Precisely adjusts
the entire pitch of the SOI
in cents regardless
of the pitch and tuning
settings in
individual banks.
Value Range:
~50~0~+50
steps
(unit: 2 cents, 100 cents=l
semitone)
With these two parameters, the
entire pitch of the SOI can
match that of
other external instruments.
*
If the MASTER TUNE value reaches 50 steps,
the
MIDI TRANSPOSE value
will automatically
increase or decrease
1 semitone.
*
The MIDI TRANSPOSE is
also useful if
you
make
a
program
that requires
a
full key
range
(88
keys or
more)
to be
reproduced using
a
keyboard with a
narrow key range
(49
keys,
61
keys or
less)
because
you can shift the
key
range
up
or down two
octaves for editing
the key range
of
samples.
You do
not need
to
have
a
full-scaled keyboard to
make or play
a
full-scaled
program.
To
set
the MIDI TRANSPOSE to
+12
(1
octave up)
r-bank
1-r-bank
2-r-bank 3-n
r-bank
1-r-bank 2-|-bank 3
^>
shifted
shifted
*
When using the MASTER TUNE
parameter,
the tuning of the samples
with
CONSTANT PITCH
set to ON
will
not
be
affected.
P. CHANGE CHANNEL
Determines the MIDI channel for reception of external MIDI program change,
from
ON,
1-16,
or
OFF.
ON:
Receives the
external
MIDI
program change on all channels
1~16.
1*16:
Receives the external MIDI program change
on
selected channel.
OFF: Does not
receive the external MIDI program change.
When
selecting a program on the SOI from an external MIDI
device, transmit the
same program
number as the desired program has been assigned with the PROG. NO., on the
channel
specified
with
this parameter.
37