Display & operation
Operation using the touch display on the fan
1.Fan function:
•
Use the “Fan” button to switch the fan ON
•
Set the wind speeds (light, medium, strong) by pressing the “SPEED/ON” button several
times.
•
Press the “OFF” button to switch the fan off.
2.Oscillates automatically:
•
First, switch the fan on. Then press the “SWING” button. The mist fan head moves continuously
from side to side. Pressing the button again stops the oscillation of the mist fan Fan.
3.Manual tilt:
•
Hold the fan head securely. Then undo the wing screw on the right-hand side of the fan head. You
can now tilt the head upwards and downwards to adjust the angle. After adjusting the angle,
tighten the wing screw again.
4.Using ultrasonic mist
“Sleep” wind setting display
“Normal”wind setting display
“Medium” wind speed 2 display
“Strong” wind speed 3 display
Fan ON & settings
Fan OFF(power)
Timer ON/timer OFF
Standby mode (light is on)
“Natural” wind setting display
Mist humidification display
“Light” wind speed 1 display
Oscillation display
Mist humidification ON/OFF
Oscillation ON/OFF
To Next Page
Loading...