Start/pause button
Rinse indication
Temp. button
Spin indication
Process buttons
Power on/off
button
• Press this
button to
switch the
power on;
press it again
to switch the
power off.
• At the end
of a washing
program, the
power will be
switched off
automatically
after 5
seconds.
• If you leave
the washer
switched on
without starting
the operation,
the power will
be switched off
automatically
after 10
minutes of
inactivity.
• Press this button to start the
washer operation.
• During operation, press this
button to stop the washer
temporarily; press it again to
restart the washer operation.
NOTE: This is not a CANCEL
button.
• This indicator
shows the number
of rinses.
• Press this button
if you want to
choose the water
temperature. See
‘Hot / cold / warm
water wash’,
page 19,
for details.
• This indicator
shows the spin time
(maximum spin time
shown is 9 minutes).
• Press these buttons to set various
wash processes. See ‘Setting the
water level ...’, page19, for details.
• Press the SOAK/VARIABLE WASH
button before the start to set a
soak time of up to 40 minutes (not
applicable for the DELICATE and
BLANKET programs).
Features (Cont.)
To Next Page
Loading...
