19
Instructions (Cont.)
Other features and functions
Hot / cold / warm water wash
If this top load washing machine is connected to both a cold and a hot water tap, you
can set it to use either just cold water for a cold water wash, or just hot water for a hot
water wash, or both hot and cold water for a warm water wash.
To select the wash temperature, press the TEMP button.
• Cold Wash: the corresponding indicator light is on.
• Hot Wash: the corresponding indicator light is on.
• Warm wash: both the Cold Wash and Hot Wash indicator lights are on.
Water power
You can set the water power for your selected wash and rinse processes, except for
the DELICATE and BLANKET programs. To set the power level:
• Press the START/PAUSE button, then press the SOAK/VARIABLE WASH button:
the display will show “H0”.
• Press the SOAK/VARIABLE WASH button again, repeatedly, to increase the water
power level from “H1”, “H2”, “H3” to the strongest, “H4”.
• Press the SOAK/VARIABLE WASH button again, repeatedly, to decrease the water
power level from “L1”, “L2”, “L3” to the weakest: “L4”.
Setting the water level and other processes
You can set the water level for wash and rinse processes. For example, if you are
sensitive to detergent residues in your washing, you may want to select a higher water
level for rinsing.
To set different water levels:
• Press the WASH button until the WASH light flashes; press the WATER LEVEL
button to choose the appropriate water level; press the WASH button to set the
wash time.
• Then press the RINSE button until the RINSE light flashes; press the WATER LEVEL
button to choose the appropriate water level; press the RINSE button to set the
number of rinses.
To set other processes:
• Then press the SPIN button until the SPIN light flashes; press the SPIN button to
set the SPIN time.
• Finally press the START/PAUSE button: the washer will start operating according to
the set values for wash and rinse water levels, number of rinses and spin time.
To Next Page
Loading...
