SP2/SP4/SP8/SP8-X20 Manual
Updated until firmware 476 - 28 -
The first section is entitled “System Settings”
System Description :- This is an MIB II value set when the microcode for the unit was installed.
It includes the build time and version of the microcode. This is a read only field.
System Name / Location / Contact :- These are used to identify the system. They are accessed
via standard SNMP utilities. The SNMP utilities use these to get information about the unit.
Data Collection Period :- This controls how often data is collected for use in the graph function.
Display Logo : Turn off displaying the logo by using this option. This option can be turned off to
allow the web pages to be loaded faster.
Send Email / Trap on boot up :- Use this option to send an Email and SNMP trap each time the
system boots up.
Delay Time for Email / Trap on boot up :- The time in seconds to delay before sending the boot
up Email or trap.
Remember to click the “Save” button after making any changes.
The next section is used for setting a user password, or changing the admin password.
(continued on next page)
To Next Page
Loading...
Need help?
General
