Do you have a question about the AKCP SensorProbe2 PLUS and is the answer not in the manual?
Model | SensorProbe2 PLUS |
---|---|
Network Interface | 10/100 Mbps Ethernet |
Number of sensor ports | 8 |
SNMP Support | Yes |
Web Interface | Yes |
Communication Interface | Ethernet |
Device Type | Environmental Monitoring |
Power Supply | 12V DC |
Humidity Range | 0% to 100% RH |
Protocols | SNMP, HTTP |
Measurement Parameters | Temperature, Humidity |
Input Channels | 8 |
Sensor Inputs | 8 analog sensor ports |
Operating Temperature | -40 to 85 °C |
Storage Temperature | -40 to 85 °C |
Describes commands triggered by holding the reset button for specific durations.
Guides users through configuring IP addresses and manual routing.
Covers basic system configurations and language management.
Explains configuring date, time, NTP, and network options.
Covers password security, maintenance tasks, and license management.