SP2+ Introduction Manual
- 15 -
System page
General
Here you can change general settings for the device.
The unit’s firmware version is shown in the Description field, and the System Name/Location/Contact
options are user configurable.
You could also specify the System URL option, for quick access of a custom part of the Web UI for
example, but you can specify any URL.
By changing the Graph Data Collection Period, you
can choose how frequently the data is sampled. Note
that if you had stored graph data previously, changing
this setting will clear the data.
Note: a Low Power Mode is selectable from AKCess Pro Server, on the Web UI this option is not
shown.
To Next Page
Loading...
Need help?
General
