Need help?Do you have a question about the Åkerströms SESAM 800 K3 and is the answer not in the manual?
General| Brand | Åkerströms |
|---|---|
| Model | SESAM 800 K3 |
| Category | Intercom System |
| Language | English |
Guidelines for safe operation, training, and handling of wireless radio remote control systems.
Critical warnings and cautions for installation, operation, and potential hazards of the Sesam system.
Details the Sesam 800 RX DIN receiver, its features like 3 SPDT relays and DIN rail mounting.
Describes the Sesam 800 Keyring K3 transmitter, a miniature 3-button unit for critical functions.
Guidance on selecting a suitable location and mounting the SESAM RX DIN on a DIN rail securely.
Notes that the antenna connector on the receiver is blocked and not in use.
Details power and relay connections for the receiver, including terminal layouts and examples.
Step-by-step guide for basic receiver configuration, including pairing transmitters via the Learn/Erase button.
Procedure to configure which transmitter button activates specific relays in the receiver.
Instructions to clear all paired transmitters from the receiver's memory using the Learn/Erase button.
Explains LED indications for normal operation, fault conditions, and battery replacement on the transmitter.
Detailed steps for replacing batteries in the Sesam K3 transmitter, including screw removal and battery insertion.
To Next Page