Do you have a question about the AKG D 112 and is the answer not in the manual?
Type | Dynamic |
---|---|
Polar Pattern | Cardioid |
Frequency Response | 20 Hz - 17 kHz |
Impedance | 210 ohms |
Max SPL | 160 dB SPL |
Connector | XLR |
Sensitivity | 1.8 mV/Pa (-55 dBV) |
Details the D112's function as a dynamic cardioid mic for bass instruments.
Describes the die-cast aluminum case and stainless steel grille of the D112.
Tips for positioning the D112 to capture optimal bass drum sound.
Guidance on placing the D112 for bass guitar amplifiers.
How to position the D112 for electric guitar amplifiers.
Advice for miking a double bass for warmth and fullness.
Tips for miking brass and wind instruments, avoiding noise.
Explains balanced XLR and unbalanced Jack connections for the D112.
Common problems due to incorrect wiring or poor soldering.
Covers impedance matching, safety grounding, and microphone handling.
Lists key technical data including frequency response, impedance, and sensitivity.
Details standard accessories and recommended optional items.
Graphical representation of the D112's sensitivity across frequencies.
Illustrates the D112's directional pickup pattern at various frequencies.
Provides physical dimensions of the D112 microphone.