akira AC-PR12HM - Page 6

6
Model No.: AC-PR12HM
Version: 1.0
Low fan speed lamp.
Fan speed setting button. Push this button to select fan speed: High, Med and Low.
Power button. Push this button to start the unit.
Water full alarm lamp.
Power lamp.
Remote controller:
LCD display.
Mode button: Select the operation mode, AUTO, COOL, DRY, HEAT (cooling
only with electric heater models only) and FAN.
Fan speed button: Select the Fan speed, AUTO, LOW, MED, HIGH.
ON/OFF button: Press this button to operation the unit, again to stop.
Temperature setting up
button:
Press this button to increase temperature setting or adjust the TIMER
in a clockwise direction.
Temperature setting down
button:
Press this button to decrease temperature setting or adjust the TIMER
in a counter-clockwise direction.
Timer on button: Push this button to set the ON timer.
Timer off button: Push this button to set the OFF timer.
Lock button: Press this button to lock all button except this button.
Reset button: Press this button to reset all settings to factory settings.