DIVERSITY RECEIVER
This is a diversity receiver with two RX modules.
Button introduction:
Select button: Confirms the selections
Up/Down button: Move the selection cursor in desired directions
USER MANUAL
LED introduction:
Instructions
Power on the diversity receiver on the goggles via 5V,
the OLED screen will display the AKK logo.
Active Channel:
Show current band, channel, frequency with configured callsign.
Show index signal strength of the RX module A and B in % or dBm
Saved Channels: To save desired channels and delete undesired
channels. Press Select button 3s to save/delete/exit. You can save
8 channels max. The default saved channels are A1 to A8.
Time out: If you stay in this mode with no operation, the OLED will
display count down and auto exit to ACTIVE CHANNEL interface.
Symbol of channel saved.
To Next Page
Need help?
General