To Next PageTo Next Page
Need help?Do you have a question about the Akuvox A01 and is the answer not in the manual?
General| Type | IP Access Controller |
|---|---|
| Connectivity | Ethernet |
| Power Supply | 12V DC |
| Compatibility | Akuvox intercom systems |
| Operating System | Embedded Linux |
| Communication | TCP/IP |
| Relay Output | 1 |
| Installation | Wall-mounted |
| Network Interface | 10/100M Ethernet |
| Power Supply Details | 12V DC, 1A |
| Operating Humidity | 10% to 90% RH non-condensing |
| Weight | 200g |
List of accessories included in the shipped box for device installation and use.
Overview of the Akuvox A01 model, highlighting its features like Card Reader.
Overview of the Akuvox A02 model, highlighting its features like Card Reader and Keypad.
Overview of the Akuvox A03 model, highlighting its features like Card Reader and Bluetooth.
Detailed steps for installing the junction box bracket via wall-mounting.
Procedure for flush mounting the junction box, involving cutting holes and using adhesive.
Instructions for connecting cables, securing wires, and attaching the back cover.
Guidance on physically mounting the device onto the installed bracket.
Schematic showing connections for Wiegand, Ethernet, power, and door lock functions.
Diagram illustrating the network layout and device connectivity.
Instructions for obtaining IP address, accessing Web UI, and adding users.
Procedure for unlocking the door by presenting a predefined RF card.
