3 Settings
3.1 Language
You can change the Phone language through below method:
Press Menu->Settings->Basic Setting->Language
3.2 Data&Time
1. The IP phone displays Time and Date in Idle status. You can set the Time and Date
obtain from SNTP server automatically or you can set the time and date manually.
2. Set SNTP via phone interface: Access Menu->Settings->Basic Setting->Date & Time
3. To set the date & time format via the phone interface, access Menu->Settings->
Basic Setting->Date & Time->Format Setting:
Access the Time Format in Format Setting interface, then press the Left or Right
Soft key to select the time format (12Hour or 24Hour).
In the Date &Time Format interface, press the or key on the phone
keyboard to access the Date Format. Press softkey to select the date format
to process setting.
The phone supports six Date formats. The selected date format will appear in the
Idle. For example, if the time was “2015-11-18”, the date formats in the menu
and the corresponding formats displayed in the Idle as follows:
To Next Page
Loading...
Need help?
General
