Akuvox R15PVM User Manual

37
Note: LLDP stands for Link Layer Discovery Protocol, it’s
used to exchange device information between any two
directly-connected devices. LLDP is often used to
configure Voice Vlan automatically for IP phone.
Local RTP
To display and configure Local RTP settings.
 Max RTP Port: Determine the maximum port that
RTP stream can use.
 Min RTP Port: Determine the minimum port that
RTP stream can use.
SNMP
To display and configure SNMP settings.

Active: To enable or disable SNMP feature.

Port: To configure SNMP server’s port.

Trusted IP: To configure allowed SNMP server
address, it could be an IP address or any valid URL
domain name.
Note: SNMP (Simple Network Management Protocols) is
Internet-standard protocol for managing devices on IP
networks.
VLAN
To display and configure VLAN settings.

LAN Port/PC Port: You can configure VLAN setting
for both ports respectively.

Active: To enable or disable VLAN feature for
designated port.

Vid: To configure VLAN id for designated port.

Priority: To select VLAN priority for designated port.
Note: Please consult your administrator for specific
VLAN settings in your networking environment.
QoS
To display and configure QoS settings.
 SIP QoS: To configure QoS value for all SIP message.
 Voice QoS: To configure QoS value for all audio
stream(RTP streams).
TR069
To display and configure TR069 settings.
 Active: To enable or disable TR069 feature.
 Version: To select supported TR069 version (version
1.0 or 1.1).
 ACS/CPE: ACS is short for Auto configuration servers
as server side, CPE is short for Customer-premise
equipment as client side devices.
 URL: To configure URL address for ACS or CPE.
 User name: To configure username for ACS or CPE.
 Password: To configure Password for ACS or CPE.
 Periodic Inform: To enable periodically inform.
 Periodic Interval: To configure interval for periodic
inform.

Akuvox R15PVM Specifications

General

Brand	Akuvox
Model	R15PVM
Category	Telephone
Language	English