Why won't my AL-KO Easy Crush LH 2800 motor start?
If the motor of your AL-KO Paper Shredder doesn't start, check the following: * Ensure the direction of rotation switch isn't in the zero position. Turn it to the left or right. * Make sure the grass catcher is fully pushed in and locked. * Try a different mains socket to rule out a defective house installation. * Inspect the extension cable for any damage and replace it if necessary.
What to do if my AL-KO Easy Crush LH 2800 won't pull in materials?
If your AL-KO Paper Shredder isn't pulling in materials, it could be due to a few reasons: * The direction of rotation might be incorrect. Turn the direction of rotation switch to the left for normal operation. * The grass catcher might be overflowing, causing a backup. Empty the grass catcher. * The cutting drum could be clogged with wet materials. Try removing the clog by feeding branch material.
Why does my AL-KO Easy Crush LH 2800 Paper Shredder motor keep switching off?
If the motor of your AL-KO Paper Shredder switches off, it's likely because the motor protection switch has been triggered due to a cutting drum overload or blockage. Allow the motor to cool down for approximately 5 minutes before switching it back on.
How to fix AL-KO Easy Crush LH 2800 Paper Shredder not cutting properly?
If the materials aren't being cut properly by your AL-KO Paper Shredder, the counterplate in the cutting unit may not be correctly adjusted. Readjust the counterplate.
Why is my AL-KO Easy Crush LH 2800 Paper Shredder making rattling noises?
If you hear unusual rattling noises from your AL-KO Paper Shredder, it's possible that some screws on the motor, its mount, or the carriage are loose. Try re-tightening these screws.
Describes the machine's intended purpose and lists its main components.
Provides detailed specifications and performance metrics for the shredder.
Outlines fundamental safety precautions to be observed before operation.
Details the essential protective gear required for safe operation.
Covers safety rules for the operating environment and user conduct.
Lists included components and provides step-by-step assembly instructions.
Guides on how to connect the machine to power and start the motor.
Instructions for switching the motor, handling jams, and reverse operation.
Procedures for emptying the grass catcher and safely transporting the machine.
Details on adjusting the counterplate and performing routine cleaning.
Guidelines for storing the machine and best practices for effective use.
A guide to identifying and resolving common machine malfunctions.
Instructions for environmentally responsible disposal of the machine.
General| Power | 2800 W |
|---|---|
| Product color | Black, Grey, Red |
| Cutting system | Drum |
| Material throughput | - kg/h |
| Collection box capacity | 50 L |
Weight and Dimensions| Weight | 29000 g |
|---|
To Next Page
