What to do if my AL-KO HT 600 FLEXIBLE CUT cuts out intermittently?
If your AL-KO Brush Cutter cuts out intermittently, the extension lead may be damaged, so check it. Alternatively, the ON/OFF switch could be defective, or there could be an internal fault, in which case you should contact an AL-KO Service Centre.
What to do if the blades get hot on my AL-KO Brush Cutter?
If the blades of your AL-KO Brush Cutter get hot, it could be due to insufficient lubrication. Try lightly oiling the blades. It may also be that the blades are blunt or have notching, in that case you should contact an AL-KO Service Centre.
General| Brand | AL-KO |
|---|---|
| Model | HT 600 FLEXIBLE CUT |
| Category | Brush Cutter |
| Language | English |
Offers crucial warnings regarding vibration, reading instructions, and potential hazards.
Essential precautions for using the tool with electricity, covering plugs, grounding, and water.
Recommendations for user alertness, protective equipment, and preventing accidental starts.
To Next Page
