EasyManua.ls Logo

AL-KO solo 163-55 - User Manual

AL-KO solo 163-55
272 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DE
EN
NL
FR
ES
IT
PL
HU
DA
SV
NO
FI
UK
bETRIEbSANLEITUNg
BENZIN-HECKENSCHERE
163-55
163-70
441662_b 08 | 2016

Table of Contents

Questions and Answers

  • W
    William SmithAug 4, 2025
    Why my AL-KO Brush Cutter motor does not start?
    • D
      daniellemckinneyAug 4, 2025
      If your AL-KO Brush Cutter motor doesn't start, or starts with difficulty, several factors could be at play. It could be a fuel supply or compression system issue, or a mechanical defect. Inspect the wiring, spark plug, spark plug cap, and ignition module. Also, check if the choke is correctly positioned, the carburettor, suction head (fuel filter), and fuel pipe. Examine the cylinder base gasket, crankshaft seals, and piston rings for damage. Replace the spark plug seal if it's defective. Finally, look for a broken starter spring or broken parts within the motor.
  • W
    William HaasAug 14, 2025
    What to do if my AL-KO Brush Cutter starts, but stops immediately?
    • H
      Henry ClarkeAug 14, 2025
      If your AL-KO Brush Cutter starts but stops immediately, it could be due to an incorrectly set idling speed or contamination of the suction head or carburettor. Adjust the idling speed and clean the suction head and carburettor. Also, inspect the ventilation opening in the fuel tank, check the fuel supply pipe, and test the cable and ON/OFF switch.
  • C
    Claudia AlvarezAug 25, 2025
    How to fix insufficient power in my AL-KO Brush Cutter?
    • J
      Jenna CollinsAug 26, 2025
      If your AL-KO Brush Cutter has insufficient power, the air filter, carburettor, silencer, or outlet duct in the cylinder might be contaminated or blocked. Clean the air filter and carburettor, and unblock the silencer and outlet duct in the cylinder.

Summary

Translation of Original Instructions

Designated use

Defines the exclusive purpose of the hedge trimmer for cutting hedges and bushes.

Symbols on the Machine

Symbols

Explanation of various warning and operational symbols used in the manual.

Product Overview

Product overview

Diagram and list of components of the solo by AL-KO hedge trimmer.

Technical Data

Technical Data

Detailed specifications including dimensions, weight, power, and sound levels for models 163-55 and 163-70.

Safety Instructions

General safety rules

General safety rules for operating the hedge trimmer, including user responsibility and precautions.

Personal protective equipment

Mandatory protective clothing and equipment to be worn by the operator for safe hedge trimming.

Operation

WARNING!

Important warning regarding starting the motor and general operating precautions.

Operation

Guidelines on how to use the hedge trimmer safely and correctly, including handling and posture.

Filling

Instructions for safely refuelling the hedge trimmer with the correct fuel/oil mixture.

Fuel;oil mixture

Details on the correct fuel and oil mixture ratio and preparation for the two-stroke engine.

Adjusting the angle of the rear handle

Procedure for adjusting and locking the angle of the rear handle for optimal use.

Starting the machine

Step-by-step guide for starting the hedge trimmer, including cold start procedures.

Stopping the machine

Instructions for safely stopping the hedge trimmer motor.

Maintenance and Care

Maintenance instructions

General guidelines for maintaining the hedge trimmer to ensure longevity and optimal performance.

Sharpening the knives

Procedure for sharpening the cutting knives, including angles and precautions.

Resetting the separation between upper and lower knives

Steps to adjust the gap between the upper and lower cutting knives for optimal cutting performance.

Checking and adjusting the idling speed

Procedure for checking and adjusting the engine's idling speed for proper operation.

Cleaning the air filter

Instructions for cleaning the air filter to maintain engine performance and prevent damage.

Checking the spark plug

Procedure for checking and cleaning the spark plug after a specified number of operating hours.

Lubrication

Guidelines for lubricating the hedge trimmer at prescribed intervals to prevent damage.

Cleaning the fuel filter

Procedure for cleaning or replacing the fuel filter to ensure proper fuel supply.

Replacement of the fuel pipe

Instructions for inspecting and replacing the fuel pipe to prevent fuel leaks and fire hazards.

Replacing the tank cap

Guidelines for replacing a damaged or worn fuel tank cap.

Daily inspections and maintenance tasks

Tasks to perform regularly before and after use to ensure machine longevity and prevent damage.

Maintenance schedule

A schedule outlining maintenance tasks based on operating hours and time intervals.

Troubleshooting

TROUBLESHOOTING

Identifies common problems, observed symptoms, and their potential causes for the hedge trimmer.

Insufficient power

Common causes and observations for the hedge trimmer experiencing insufficient power.

Storage

STORAGE

Instructions for storing the hedge trimmer for extended periods, including draining fuel and oiling.

First Aid

FIRST AID

Information on essential first aid supplies and emergency contact details in case of an accident.

EC Declaration of Conformity

EC DECLARATION OF CONFORMITY

Declaration by the manufacturer that the product complies with EU directives and standards.

AL-KO solo 163-55 Specifications

General IconGeneral
BrandAL-KO
Modelsolo 163-55
CategoryBrush Cutter
LanguageEnglish

Related product manuals